Digital Sub-Micro Servo (0.075kg-cm) BM22O2121-A

US$ 7.50

In stock

Quantity

Product ID

BM22O2121-A

DESCRIPTION

BM22O2121-A is a servo with UART interface which provides 0.075kg-cm torque. It includes a 3-Pin Power / 1-wire bidirectional UART interface. It is suitable for application in remote control cars, remote control planes, remote control models, remote control robots, etc.

Comparing with the PWM servo, the UART servo is able to control a wider angle and has higher accuracy. In addition, UART servo can be connected in series with each other, and users can control them by an external MCU. Please refer to DETAILS for more information.

Product information

Dimension: 13.5 x 6.2 x 16 mm
Net weight: 2g
Packing List: BM22O2121-A x 1 / Expansion board x 1 /
Screw x 3 / Single arm horn x 1 / Double arm horn x 1 /
Four Point horn x 1

Quantity Discounts refresh image

Select	Quantity	Discount	Unit Price
	1-9	-	US$ 7.50
	10-99	10%	US$ 6.75
	100+	15%	US$ 6.38

For more quantity discounts please contact us

Details
Documents

PRODUCT SERIES

The servos have different sizes, and the rotation speed, angle, torque and accuracy of them are also different.

PRODUCT FEATURES

Operating Voltage: 5.0V - 7.2V
Operating Current
- 3.4mA @ 5.0V (Typ., no load)
- 0.7A @ 5.0V (Typ., stall)
Standby Current: 0.6mA～1.0mA @ 5.0V (sleep mode)
Communication interface: 1-wire bidirectional UART interface
Plastic Gear
Protection functions: stall and low-voltage
Angle control mode: controlled range 0°～140°, rotation time is adjustable

CONNECTION

Differences between PWM and UART servos

The PWM servo

Users can control the servo's angle through a fixed PWM cycle, but its performance of accuracy is not as good as UART servo. For robot control, one PWM output port only can be connected to one PWM servo.
To connect multiple servos, it necessary to use a control board to connect with servos, and the wires are in a mess.

The UART servo

The servo's angle can be controlled by UART command, and it has high performance of accuracy. Besides, it also provides speed control. It communicates with control board through 1-wire bidirectional UART interface, and users can connect multiple servos in series.
The firmware and parameters can be updated by UART and IAP.