APP: "BCBLEDemo" can be searched on Apple APP store.
We did not launch the APP on Android Play store. To use the APP, you need to scan the below QRcode, download 'bcm7602.apk', and install it.
Steps
In the below steps, we use BCE-GENTrx32-002 and e-Link32 Pro with the BM7701-001.
Connect the BM7701-00-1 to the development board, BCE-GenTrx32-002, via a breakout.
Use the e-Link32 Pro and software e-Link32 Pro ICP Tool to program the code to the BCE-GenTrx32-002.
The code can be downloaded on the "Documents" label.
The BCE-GenTrx32-002 supports three types of power sources. Select one of the power sources to power the board.
Power Supply
1. External power (VEXT): connect to external power which does not exceed 3.6V.
2. Micro USB (LDO33): connect to 3.3V power.
3. Batteries (BATT): put two 1.5V AA batteries in the holder.
★ Select one of these power sources above, put a jumper on the corresponding pin header, and turn on the power switch.
Download the App, BLEDemo, on your mobile and turn on the power of the development board.
Enable the Bluetooth on your mobile and open the APP to pair with BM7701.
You can evaluate the module’s function if the pairing is successful.
RESOURCES
IC: BC7701, BT5.2 BLE Controller, including datasheet, package information, etc.
Application note: AN0614EN, BM7701-00-1 Application Note, including BCE-GENTrx32-002 hardware overview, BM7701-00-1 library, etc.