Description

This adaptor is used to program Holtek 8-bit MCU BH67F2132 48LQFP. It must be used together with the Holtek e-WriterPro programmer.

To use this adaptor, insert it into the slot on the e-WriterPro. When placing IC into this adaptor, keep the IC pin1 to align with pin1 of this adaptor (marked on the PCB).

The adapter is a consumable. The suggested programming times is 10,000 times. When the adaptor has programmed over 10,000 times, the e-WriterPro will display a warning message. It is recommended to replace a new adaptor to ensure successful programming.

The pin header on the adaptor is used for in-circuit-programming (ICP) purpose. Only 4 signals are necessary for BH67F2132 ICP: ICPCK, ICPDA, VDD, and GND. Connect these ICP signals to your target board to program the MCU on the board. Please refer to the e-WriterPro User's Guide for using the e-WriterPro ICP function.