Description

This adaptor is used to program Holtek 8-bit MCU with 6-pin DFN package type (2mm x 2mm x 0.35mm). It must be used together with the Holtek
e-WriterPro programmer. Note that 6-pin DFN package has two kinds of dimension: 2mm x 2mm x 0.75mm and 2mm x 2mm x 0.35mm. Please make sure the package dimension before purchasing adaptor.

To use this adaptor, insert it into the slot on the e-WriterPro. When placing IC into this adaptor, keep the IC pin1 to align with pin1 of this adaptor (marked on the PCB).

The adapter is a consumable. The suggested programming times is 10,000 times. When the adaptor has programmed over 10,000 times, the e-WriterPro will display a warning message. It is recommended to replace a new adaptor to ensure successful programming.

The ICP pins (in the upper-right of the adaptor) are not used. The e-WriterPro is capable of performing ICP individually. Please refer to the e-WriterPro User's Guide for using the e-WriterPro ICP function.